Download PDF

    PH903 - 2 SPIRALS OF HIGH TENSILE STEEL WIRE, 1 BRAID OF SS SOFT WIRE

    product img

    Construction

    Inner tube

    Polytetrafluoroethylene (PTFE)

    Reinforcement

    2 Spirals of high-tensile steel wire, 1 braid of G.I steel wire

    Safety Factor

    up to 50 °C - 1,0 / up to 100°C - 0,95 / up to 150°C - 0,9 / up to 200°C - 0,83 for higher temperatures

    Application

    Automotive: Hot Melt Adhesives / Hot Glue Dispensing, Injection Molding, Chemical Transfer / Paint Transfer, Robotic Systems, Compressed Gas

    Note : Production related variations of Burst Pressure of upto 10% possible. Indicated working pressure refers to hose only. Depending on the end connectors used, the permited working pressure of hose assembly may be less
    Item
    Code    		 DN
    img
    ID
    OD
    OD
    img
    WP
    img
    BP
    img
    BR/r
    img
    W
    inch mm mm psi bar psi bar mm g/m
    PH903-04 6 1/4 6.2 11.2 7250 500 29000 2000 60 270
    PH903-05 8 5/16 8.0 13.4 6880 475 27500 1900 85 345
    PH903-06 10 3/8 10.0 15.7 6525 450 26100 1800 110 500
    PH903-08 12 1/2 12.2 18.8 6520 450 26100 1800 150 600
    PH903-10 16 5/8 15.1 21.6 5800 400 23200 1600 175 700
    PH903-12 20 3/4 20.2 27.5 4350 300 17400 1200 200 1055
    PH903-16 25 1 24.2 31.4 3980 275 15950 1100 240 1205
    PH903-20 32 1 1/4 32.0 39.0 3620 250 14500 1000 280 1600

    imgTemperature Range : Continuous: -70°C to +200°C

    Important Information !

    PH903 series hoses are intended for being used as basic hoses for heating hose systems. They do not have an outer cover and the wires are not protected against corrosion. It is not allowed to use these hoses in a “normal” hose assembly without taking the right steps to prevent the corrosion of the wires because there exists the risk of injury as well as the possibility of the failure of the hose assembly. PH903 series hoses are available as a special execution with a plastic outer cover. For further information, Please contact manufacturer